xPC Target    

Quartz-MM 10 Digital Output

Scaling Input to Output

Hardware Output
 Block Input Data Type
 Scaling
TTL
 double
 < 0.5 = TTL low
> 0.5 = TTL high

Driver Block Parameters

Channel Vector- Enter a number between 1 and 8 to select the number of digital output lines used.

Sample Time - Enter a base sample time or a multiple of the base sample time.

BaseAddress - Enter the base address of the board. This entry must correspond to the DIP-switch settings on the board. For example, if the base address is 300 (hexadecimal), enter


 Quartz-MM 10 Digital Input Quartz-MM 10 Counter PWM