| xPC Target | |
Scaling Input to Output
| Hardware Input |
Block Output Data Type |
Scaling |
| TTL |
double |
TTL low = 0.0 TTL high = 1.0 |
Driver Block Parameters
Channel Vector- Enter a number between 1 and 8 to select the number of digital input lines used.
Sample Time - Enter a base sample time or a multiple of the base sample time.
BaseAddress - Enter the base address of the board. This entry must correspond to the DIP-switch settings on the board. For example, if the base address is 300 (hexadecimal), enter
0x300
| | Quartz-MM 10 | Quartz-MM 10 Digital Output | |