| xPC Target | |
Scaling Input to Output
| Hardware Output |
Block Input Data Type |
Scaling |
| volts |
double |
1 |
Driver Block Parameters
Channel Vector - This parameter is a combined Channel Vector and Range Vector. The number of elements defines the number of D/A channels used.
Enter a range code for each of the channels used. This driver allows a different range for each channel with a maximum of 2 channels.
The following table is a list of the ranges for this driver and the corresponding range codes.
| Input range (V) |
Range code |
Input range (V) |
Range code |
| -10 to +10 |
-10 |
0 - 10 |
10 |
| -5 to + 5 |
-5 |
0 - 5 |
5 |
For example, if the first channel is -10 to + 10 volts and the second channel is 0 to +5 volts, enter
[-10,5]
Sample Time - Enter the base sample time or a multiple of the base sample time.
BaseAddress - Enter the base address of the board. This entry must correspond to the DIP-switch settings on the board. For example, if the base address is 300 (hexadecimal), enter
0x300
| | AD 512 Analog Input (A/D) | AD 512 Digital Input | |