xPC Target

PCI-DAS1602/12 Analog Input (A/D)

Scaling of Input to Output

Hardware Input	Block Output Data Type	Scaling
volts	double	1

Driver Block Parameters

Number of Channels - If single-ended is chosen from the MUX list, then enter a number between 1 and 16 to select the number of A/D channels used. If differential is chosen from the MUX list, then enter a number between 1 and 8 to select the number of A/D channels used. This driver does not allow the selection of individual channels or to mix single-ended and differential inputs.

Range - From the list, choose either +-10V (-10 volts to +10 volts), +-5V, +-2.5V, +-1.25V, +-0.625V, 0-10V, 0-5V, 0-2.5V, or 0-1.25V.This driver does not allow the selection of a different range for each channel.

If a bipolar range is used, the bipolar switch on the board must be in the bipolar position. if a unipolar range is used, the bipolar switch must be in the unipolar position.

MUX - From the list, choose either single-ended(16 channels) or differential (8 channels). This choice must correspond to the MUX-switch setting on the board.

Sampletime - Enter the base sample time or a multiple of the base sample time.

PCI Slot (-1:autosearch) - Enter a number between -1 and n.

If only one board of this type is physically present in the target PC, enter

-1 

If two or more boards of this type are physically present in the target PC, enter the PCI slot number of the board associated with this driver block.

PCI-DAS1602/12

PCI-DAS1602/12 Analog Output (D/A)