xPC Target | ![]() ![]() |
PCI-DAS1200 Analog Input (A/D)
Scaling Input to Output
Hardware Input |
Block Output Data Type |
Scaling |
volts |
double |
1 |
Driver Block Parameters
Number of Channels - If single-ended is chosen from the MUX list, then enter a number between 1 and 16 to select the number of A/D channels used. If differential is chosen from the MUX list, then enter a number between 1 and 8 to select the number of A/D channels used. This driver does not allow the selection of individual channels or to mix single-ended and differential inputs.
Number the channels beginning with 1 even if the board manufacturer starts numbering channels with 0.
Range - From the list, choose either +-10V (-10 volts to +10 volts), +-5V, +-2.5V, +-1.25V, 0-10V, 0-5V, 0-2.5V, or 0-1.25V.This driver does not allow the selection of different range for each channel.
MUX - From the list, choose either single-ended(16 channels) or differential (8 channels). Your choice must correspond to the MUX-switch setting on the board.
Sampletime - Enter the base sample time or a multiple of the base sample time.
PCI Slot (-1:autosearch) - Enter a number between -1 and n.
If only one board of this type is physically present in the target PC, enter
-1
If two or more boards of this type are physically present in the target PC, enter the PCI slot number of the board associated with this driver block.
![]() | PCI-DAS1200 | PCI-DAS1200 Analog Output (D/A) | ![]() |