| xPC Target | |
PCI-20003M Analog Output (D/A)
Scaling Input to Output
| Hardware Output |
Block Input Data Type |
Scaling |
| volts |
double |
1 |
Driver Block Parameters
Channel Vector - This parameter is a combined Channel Vector and Range Vector. The number of elements defines the number of A/D channels used.
Enter a range code for each of the A/ D channels used. This driver allows a different range for each channel with a maximum of 2 A/D channels.
The following table is a list of the ranges for this driver and the corresponding range codes.
| Input range (V) |
Range code |
Input range (V) |
Range code |
| -10 to +10 |
-10 |
0 - 10 |
10 |
| 0 - 5 |
5 |
For example, if the first channel is -10 to + 10 volts and the second channel is 0 to +5 volts, enter
[-10,5]
The jumpers W1 to W5, W13, W14, W27, W31, W7 to W11, W30, W32 on the module must correspond to this range setting.
Sample Time - Enter the base sample time or a multiple of the base sample time.
Module No - Enter a number from 1 to 3 to identify the connector on the carrier board where the I/O module is inserted. This driver verifies if the module is placed on the specified module connector.
BaseAddress or Carrier Board (ie: 0xd000) - Enter the base address of the board. This entry must correspond to the DIP-switch settings on the board. For example, if the base address is 300 (hexadecimal), enter
0x300
| | PCI-20003M | PCI-20019M | |