| xPC Target | |
Scaling of Input to Output
| Hardware Output |
Block Input Data Type |
Scaling |
| TTL |
double |
<0.5 = TTL low >0.5 = TTL high |
Driver Block Parameters
Channel Vector - Enter channels between 1 and 16. This driver allows the selection of individual digital output lines in any order. The number of elements defines the number of digital lines you use.
For example, to use the first 8 digital outputs, enter
[1,2,3,4,5,6,7,8]
Number the lines beginning with 1 even if the board manufacture starts numbering the lines with 0.
Sampletime - Enter a base sample time or a multiple of the base sample time.
BaseAddress - Enter the base address of the board. This entry must corresponds to the DIP-switch settings on the board. For example, if the base address is 300 (hexadecimal), enter
0x300
| | PCL-818L Digital Input | Burr-Brown | |