xPC Target    

PCL-818 Digital Output

Scaling of Input to Output

Hardware Output
Block Input Data Type
Scaling
TTL
double
<0.5 = TTL low
>0.5 = TTL high

Driver Block Parameters

Channel Vector - Enter numbers between 1 and 16. This driver allows the selection of individual digital output lines in any order. The number of elements defines the number of digital lines used.

For example, to use the first 8 digital outputs, enter

Number the lines beginning with 1 even if the board manufacture starts numbering the lines with 0.

Sampletime - Enter a base sample time or a multiple of the base sample time.

BaseAddress - Enter the base address of the board. This entry must corresponds to the DIP-switch settings on the board. For example, if the base address is 300 (hexadecimal), enter


 PCL-818 Digital Input PCL-818H