model.rtw (Target Language Compiler)

Target Language Compiler

General Information and Solver Specification

When generated, each model.rtw contains some general information including the model name, the date when the model.rtw file was generated, the version number of the Real-Time Workshop that generated the model.rtw file, and so on. In addition, the Target Language Compiler takes information specific to the solver and solver parameters from the Simulink Parameters dialog box and places it into the model.rtw file.

The following describes the first part of the model.rtw file - general information (e.g., model name) and the solver specification.

Table A-1: Model.rtw General Information and Solver Specification
Variable/Record Name
Description

Name

Name of the Simulink model from which this model.rtw file was generated.

Version

Version of the model.rtw file.

GeneratedOn

Date and time when the model.rtw file was generated.

Solver

Name of solver as entered in the Simulink Parameters dialog box.

SolverType

FixedStep or VariableStep.

StartTime

Simulation start time as entered in the Simulink Parameters dialog box.

StopTime

Simulation stop time.

FixedStepOpts {

Only written if SolverType is FixedStep.

  SolverMode

Either SingleTasking or MultiTasking.

  FixedStep

Fundamental step size (in seconds) to be used.

  TID01EQ

Either 0 or 1 indicating if the first two sample times are equal (1 if they are equal). This occurs where there is a continuous sample time and one or more discrete sample times and the fixed-step size is equal to the fastest discrete sample time.

}

VariableStepOpts {

Only written if SolverType is VariableStep. These variable step options are used by the Simulink Accelerator and S-function targets.

  RelTol

Relative tolerance.

  AbsTol

Absolute tolerance.

  Refine

Refine factor.

  MaxStep

Maximum step size.

  InitialStep

Initial step size.

  MaxOrder

Maximum order for ode15s.

}

**Table A-1: Model.rtw General Information and Solver Specification**
Variable/Record Name	Description
`Name`	Name of the Simulink model from which this `model.rtw` file was generated.
`Version`	Version of the `model.rtw` file.
`GeneratedOn`	Date and time when the `model.rtw` file was generated.
`Solver`	Name of solver as entered in the Simulink Parameters dialog box.
`SolverType`	`FixedStep` or `VariableStep`.
`StartTime`	Simulation start time as entered in the Simulink Parameters dialog box.
`StopTime`	Simulation stop time.
`FixedStepOpts {`	Only written if `SolverType` is `FixedStep`.
`SolverMode`	Either `SingleTasking` or `MultiTasking`.
`FixedStep`	Fundamental step size (in seconds) to be used.
`TID01EQ`	Either 0 or 1 indicating if the first two sample times are equal (1 if they are equal). This occurs where there is a continuous sample time and one or more discrete sample times and the fixed-step size is equal to the fastest discrete sample time.
`}`
`VariableStepOpts {`	Only written if `SolverType` is `VariableStep`. These variable step options are used by the Simulink Accelerator and S-function targets.
`RelTol`	Relative tolerance.
`AbsTol`	Absolute tolerance.
`Refine`	Refine factor.
`MaxStep`	Maximum step size.
`InitialStep`	Initial step size.
`MaxOrder`	Maximum order for `ode15s`.
`}`

model.rtw Changes Between Real-Time Workshop 3.0 and 4.0 RTWGenSettings Record