M-FSK Demodulator Passband (Communications Blockset)

Modulate using the M-ary frequency shift keying method

Library

FM, in Digital Passband sublibrary of Modulation

Description

The M-FSK Demodulator Passband block demodulates a signal that was modulated using the M-ary frequency shift keying method. The input is a passband representation of the modulated signal. The M-ary number parameter, M, is the number of frequencies in the modulated signal.

This block converts the input to an equivalent baseband representation and then uses the baseband equivalent block, M-FSK Demodulator Baseband, for internal computations. The following parameters in this block are the same as those of the baseband equivalent block:

M-ary number

Output type

Signal set ordering

Frequency separation

The input must be a sample-based scalar signal.

Parameters Specific to Passband Simulation

Passband simulation uses a carrier signal. The Carrier frequency and Carrier initial phase parameters specify the frequency and initial phase, respectively, of the carrier signal. The Input sample time parameter specifies the sample time of the input signal, while the Symbol period parameter equals the sample time of the output signal.

This block uses a baseband representation of the modulated signal as an intermediate signal during internal computations. The Baseband samples per symbol parameter indicates how many baseband samples correspond to each integer or binary word in the output.

The timing-related parameters must satisfy these relationships:

Input sample time > (Carrier frequency)^-1

Symbol period < [2*Carrier frequency + 2/(Input sample time)]^-1

Input sample time = K*Symbol period*Baseband samples per symbol for some integer K

Also, this block incurs an extra output period of delay compared to its baseband equivalent block.

Dialog Box

M-ary number: The number of frequencies in the modulated signal.
Output type: Determines whether the output consists of integers or groups of bits. If this parameter is set to Bit, then the M-ary number parameter must be 2^K for some positive integer K.
Symbol set ordering: Determines how the block maps each integer to a group of output bits. This field is active only when Output type is set to Bit.
Frequency separation (Hz): The distance between successive frequencies in the modulated signal.
Symbol period (s): The symbol period, which equals the sample time of the output.
Baseband samples per symbol: The number of baseband samples that represent each modulated symbol, after the block converts the passband input to a baseband intermediary signal.
Carrier frequency (Hz): The frequency of the carrier.
Carrier initial phase (rad): The initial phase of the carrier in radians.
Input sample time: The sample time of the input signal.

Pair Block

M-FSK Modulator Passband

M-FSK Demodulator Baseband M-FSK Modulator Baseband